Muratec MFX-2550 Field Engineering Manual page 82

• V .34 reception
023
• Action at time-out in Fax / tel ready mode
• Calling period in Fax / Tel reception mode
• Number of HDLC end flags
030
• Digital cable equalizer
• Tone detection level
• EYE-Q check level at 7200 bps
031
• EYE-Q check level at 9600 bps
• EYE-Q check level at 12000 bps
• EYE-Q check level at 14400 bps
• EYE-Q slice level
032
• Check EYE-Q
• EYE-Q check level at 2400 bps
• EYE-Q check level at 4800 bps
• Delete receive echo of CFR at the receiver side
033
• Expand FSK receive time after detecting flag
• Document length limitation
040
•
051 Error line replacement
• Add remote fax mark to the journal report
052
• Name printing priority on journal report
060 • CML relay off time after dialing
• DTMF tones heard through handset
• Off-hook / on-hook detect time
061
• CNG detect in Ans / Fax read
062
• Switch-hook time
064 • CNG detect period after TAD begins recording ICM
• CNG detect period after TAD answers
• Adjustment of CI detect time
065
• Beep if fax handset is hanged up
• Display error line
070
• Tonal line monitor
• Print check message if power is lost
• Print page if error occurs during memory transmission
• Print check message
• Print TCR with the original page during memory transmission when
071
the result is NG
• Print TCR with the original page during memory transmission when
the result is OK
• Print T.30 monitor at communication error
• Print T.30 monitor
• Display modem speed
• Erase polled document
072
• Timing to turn off the S-Relay at fax reception
076
• Display when there is no TTI
• Day light saving time (Summer time) start month
097
• Day light saving time (Summer time) start week
• Day light saving time (Summer time) end month
098
• Day light saving time (Summer time) end week
3-30