Monitor Speaker; Test Modes - Muratec MFX-2550 Field Engineering Manual

3.11 Monitor speaker

If you need to monitor the signal of fax communication, turn this mode to on. You can hear the signal
sound with machine's speaker during fax transaction.
1. Press <Setting>, <*>, <0>, <8>.
2. Select the monitor type from [ON until DIS] or [ON].
3. Select the speaker volume.
To turn this mode off, perform step 1 and 2 by selecting [OFF].

3.12 Test Modes

This mode offers the ability to print a test pattern and monitor certain unit output functions. Included
are followings.
• Life monitor
• Test pattern print
• Document feeding test
• Set background level
• Make color Gamma
• Select color Gamma
3.12.1 Life Monitor
This function displays the machine status.
1. Press <Setting>, <*>, <0>, <9>, then select [Life Monitor].
2. Press [Detail] to see the options.
• ROM Ver.0 = displays main control board software version
• ROM Ver.1 = displays network software (OfficeBridge) version
• ROM Ver.2 = displays PDL (printer description language) version
Display Item
Scan Count
1 Page Count
Tx (Transmission) Count
Drum Recycled
Drum Life
2
After Replaced
After Caution
Detail
Cumulative total pages
Number of times drum is replaced
Current drum working time (x 10 seconds)
Total printed pages on current drum
Total printed pages since "Replace drum" warning is
displayed
3-98