Dadf Frame Scanner - Muratec MFX-2550 Field Engineering Manual

DADF FRAME SCANNER

1. Open the DADF cover TX [1].
2. Open the DADF guide inner A [2].
3. Release the four hooks [3], then remove the DADF FRAME SCANNER [4].
* There are four springs [5] that will come off in this procedure. Be sure not to lose any.
[ 1 ]
[ 2 ]
[ 5 ]
[ 4 ]
[ 3 ] [ 5 ]
[ 3 ]
[ 3 ]
4. Disconnect one connector [6].
5. Release the two hooks [7], then remove the Cover PCB scanner [8].
6. Disconnect two connectors [9], then remove the DADF FRAME SCANNER [10].
[ 7 ]
[ 8 ]
[ 6 ] [ 9 ]
[ 10 ]
[ 9 ]
5-30