CLUTCH
1. Remove the Cover TX B. (See COVER TX B)
2. Remove the harness guide. (See DADF GUIDE INNER A)
3. Disconnect the two connectors [1].
4. Remove the two screws [2], then remove the Stay drive sensor [3] and Clutch [4].
[ 2 ]
[ 1 ]
[ 4 ]
[ 3 ]
[ 1 ]
[ 2 ]
5. Remove the Gear 15 [5], then remove one SR4 [6] and Bearing D6 [7].
6. Remove the Shaft clutch separator [8], then remove the CLUTCH [9].
[ 8 ]
[ 5 ]
[ 6 ]
[ 7 ]
[ 9 ]
[ 3 ]
5-46