Gears (Back) - Muratec MFX-2550 Field Engineering Manual

GEARS (BACK)

1. Remove the DADF cover TX. (See DADF COVER TX)
2. Remove the DADF frame scanner. (See DADF FRAME SCANNER)
3. Remove the DADF guide inner A. (See DADF GUIDE INNER A)
4. Remove the DADF guide inner B equipped with DADF DRIVE. (See DADF GUIDE INNER B equipped
with DADF DRIVE)
5. Remove the Stay drive sensor and Clutch. (See CLUTCH)
6. Remove the Frame motor. (See MOTOR (STEPPING))
7. Remove the GEAR 52/30 [1].
8. Remove the GEAR 69/41 [2].
9. Remove the GEAR 49/32 [3].
10. Remove the two GEARs 35B [4].
11. Remove the two E-rings [5], then remove the two GEARs 52A [6].
12. Remove the Bearing D6 [7] and Bearing D6 8 [8].
[ 4 ]
[ 7 ]
[ 6 ]
[ 5 ]
[ 2 ]
[ 8 ]
[ 4 ]
[ 6 ]
[ 1 ]
[ 3 ]
[ 5 ]
5-49