Muratec MFX-2550 Field Engineering Manual page 190

3.32.3 Setting details
The following settings are available for capturing packets:
Target
Protocol
Port / Service
# of Packet
Packet Size
Free
Enter either of the following three output method:
Mail
Folder
FTP
All Host : To capture the packets between the machine and all hosts, select this.
Specific Host : To capture the packets between the machine and specific host, se-
lect this. Enter the host name in the "Host" field". You can enter only
IP address when you enter it from the machine control panel.
Select the protocol to capture. You can select multiple protocols.
Enter the port number or service name to capture. If this field is empty, all ports and
services are captured. You can enter only port numbers when you enter it from the
machine control panel.
Port number entering sample : 21, 80, 88
Service name entering sample: ftp, http, kerberos
Enter the number of packets to capture. When this field is not entered, capturing
does not complete.
You can enter number from 64 to 20,000.
Enter how much bites to retrieve from one packet.
You can enter number from 1 to 1514 bites.
Set up optional "tcpdump" items.
However the following parapmeters will be ignored even when they are entered:
-w : save file
-c : number of packets
-s : Each capture size from one packet
This field is not available from the machine control panel.
Enter the e-mail address to send the data by e-mail. The address book is not avail-
able.
Enter the folder path, account and password to send the data to a shared folder.
Folder shortcuts are not available.
Enter the FTP server folder path, account and password to send the data to a FTP
server. The shortcuts are not available.
3-138