Muratec MFX-2550 Field Engineering Manual page 136

Unique Switch 09x : Miscellaneous
Unique Switch 090 ~ 094 — Factory use only
Unique Switch 095 :
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 0 F4 paper length
0 0
Unique Switch 096 and 097— Factory use only
Unique Switch 098 :
Initial
Switch
Setting
7 0 Factory use only
Respond warm-up condition
6 0
as ready on SNMP
0 : Respond as warm-up
1 : Respond as ready
5 0 Respond Sleep condition as
ready on SNMP
0 : Respond as sleep
1 : Respond as ready
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 0 Factory use only
0 0 Factory use only
Adjust
Set the F4 paper length
Adjust
To print on Row port correctly by AS400, set this
switch to "1".
When this switch is "1", SNMP manager such as
WebJetAdmin displays "Ready" even if the printer
is in warm-up condition. When the printer warms up
while it is receiving information on Row port, the job
will be divided. The latter divided job will be printed
with initial font as it has no font information. This
setting will avoid this font issue.
To print on Row port correctly by AS400, set this
switch to "1".
When this switch is "1", SNMP manager such as
WebJetAdmin displays "Ready" even if the printer
is in sleep condition. When the printer sleeps while
it is receiving information on Row port, printing will
be disabled. To enable printing again, this error
should be recovered with administrator authority,
and this setting will avoid this issue.
3-84
Usage/Comments
Switch 1 0 length
1 0 353 mm
0 1 342 mm
0 0 330 mm (default)
Usage/Comments