Muratec MFX-2550 Field Engineering Manual page 201

1 Press <Setting>, <*>, <9>, <8>
2 Press [Update from the network].
3 Press [Specifying Server].
This step is needed only at the first time. When once the setting is registered, skip to step 5.
4 Enter the Protocol, Path, Account, Password, Proxy Server, and Proxy Port, and press [Close].
5 Press either [Update to the latest version] or [Specify with specified version].
6 Select the ROM type and ROM version to update, and press [Enter].
When [Update to the latest version] is pressed, select the ROM type to update. The selected ROM type
will be highlighted.
When [Specify with specified version] is pressed, select the ROM type and enter the ROM version.
7 Press [Update].
8 Press [Yes] and the updating starts.
9 When updating is finished, turn the machine OFF and ON.
10 Press <My MFP> and check the ROM version to see the update has succeeded.
NOTE
The setting you entered at step 4 will only be saved when you continue the updating steps until step 8.
When you cancel the steps, the setting will not be saved.
3-149