Muratec MFX-2550 Field Engineering Manual page 212

3.42.8 Modifying the session control time
Modify the session time between the machine and the OfficeBridge users here. The factory default is 30 min-
utes.
When there is no communication between the machine and the OfficeBridge user during this time, the user
will forcibly be log out.
The time can be set between 10 to 1440 minutes (24 hours).
1. Open the network service screen. (See page 3-152.)
2. Click [Session Control time].
3. Input the desired value and click [Save].
3.42.9 Asset Number
This mode is used to input the asset number. You can also input the asset number from the machine control
panel. (See page 3-143.)
1. Open the network service screen. (See page 3-152.)
2. Click [Machine Settings].
3. Input the asset number and click [Save].
3-160