Roller Feed Duplex - Muratec MFX-2550 Field Engineering Manual

ROLLER FEED DUPLEX

1. Remove the Cover jam access. (See COVER JAM ACCESS)
2. Remove the Guide inner. (See ROLLER TRANSFER)
3. Remove two screws [1], then remove the Guide upper JAC [2].
[ 1 ]
[ 1 ]
[ 2 ]
4. Remove four E-rings [3], then remove two Flange pulleys [4].
5. Remove the Belt (timing) [5] from the Gear 20/25P [6].
6. Remove two Gears 20/25P [6].
7. Remove four Bearings D6 8 [7].
[ 6 ]
[ 4 ]
[ 5 ]
[ 7 ]
[ 3 ]
[ 3 ]
[ 4 ]
[ 6 ]
[ 3 ]
[ 7 ]
[ 7 ]
5-110