DISPLAY (LCD)
1. Remove the Cover platen.(See COVER PLATEN)
2. Remove the ASSY cover top.(See ASSY COVER TOP)
3. Remove the Panel.(See PANEL)
4. Remove four screws [1].
5. Disconnect the connector [2] from the Speaker and remove the Cover panel lower [3].
* If the connector is not disconnected, the Speaker harness may break. Be sure to disconnect the connector.
[ 1 ]
6. Remove four screws [4], then remove the Cover PCB panel [5].
7. Disconnect six connectors [6].
8. Remove three screws [7], then remove the Frame panel [8].
[ 8 ]
[ 3 ]
[ 5 ]
[ 4 ]
[ 4 ]
[ 6 ]
[ 7 ]
[ 1 ]
[ 2 ]
[ 4 ]
[ 4 ]
[ 6 ]
[ 7 ]
[ 6 ]
5-69
[ 1 ]
[ 1 ]
[ 7 ]
[ 6 ]