Assy Shaft Joint (2Nd Cst) - Muratec MFX-2550 Field Engineering Manual

ASSY SHAFT JOINT (2nd CST)

1. Remove the Printer cassette 2nd from the main unit. (See SENSOR PES2)
2. Pull out the Cassette 2nd. (See SENSOR PES2)
3. Remove the Roller feed 2nd. (See ROLLER FEED 2ND)
4. Remove the Plate frame B [1]. (See PLATE FRAME B)
5. Remove three screws [2], then remove the Holder gear 2nd [3].
6. Remove one E-ring [4], then remove the ASSY SHAFT JOINT [5].
[ 1 ]
[ 5 ]
[ 3 ]
[ 4 ]
[ 2 ]
[ 2 ]
[ 2 ]
5-128