Printer Diagnostic Mode - Muratec MFX-2550 Field Engineering Manual

3.21 Printer diagnostic mode

This mode can confirm the operation of each parts of the printer section.
1. Press <Setting>, <*>, <2>, <3>.
2. Select the device you want to set to ON.
Fan Full : Rotate the fan motor with full power
Rx Motor : Rotate the Rx motor
Dup Dir CW : Rotate the Duplex Motor clockwise (CW) or counterclockwise (CCW).
Mup Mtr : Rotate the duplex motor
Shift Mtr : Rotate the shift motor. This is not available for MFX-2550.
Clutch 1 : Turn on clutch of cassette 1
Clutch 2 : Turn on clutch of cassette 2
Man Clutch : Rotate Bypass tray feed clutch
Reg Clutch : Turn on Register roller clutch
ALL OFF : Turn the all device to off
3.Press the key once again will turn the device off.
Press [All OFF] to turn all device off at once.
4. Press [Close] to exit.
3-122