Display Mld-Snooping Static-Group; Display Mld-Snooping Router-Port - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
slot slot-number: Specifies a member device by its member ID. The slot-number argument represents the
member ID of a device in the IRF fabric. If no member device is specified, this command displays
information about the dynamic router ports on the master device in the IRF fabric.
Examples
# Display information about the dynamic router ports in VLAN 2.
<Sysname> display mld-snooping router-port vlan 2
VLAN 2:
Router slots (0 in total):
Router ports (2 in total):
XGE1/1/5
XGE1/1/6
Table 30 Command output
Field
VLAN 2
Router ports (2 in total)
(00:01:30)
Related commands
reset mld-snooping router-port
display mld-snooping static
Use display mld-snooping static
entries.
Syntax
display mld-snooping static
[ verbose ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
(00:01:30)
(00:00:23)
Description
VLAN ID.
Total number of dynamic router ports and the port list.
Remaining time of the aging timer for the dynamic router port. On IRF devices, to
display the remaining time for a non-aggregate interface on a member device that
is not the master device in the IRF fabric, you must specify the slot slot-number option.
For an aggregate interface, you do not need to do this.
group
-
group to display information about static MLD snooping forwarding
-
group [ ipv6-group-address | ipv6-source-address ] * [ vlan vlan-id ]
-
100