Display Mld Ssm-Mapping - HP 5900 Series Command Reference Manual

Field
Startup-query
Other-querier-present-timer-expiry
MLD groups reported in total

display mld ssm-mapping

Use display mld ssm-mapping to display MLD SSM mappings.
Syntax
display mld [ vpn-instance vpn-instance-name ] ssm-mapping ipv6-group-address
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If you do not specify a VPN instance, the command displays MLD SSM mappings on the
public network.
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. The value range for this
argument is FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y"
represent any hexadecimal numbers from 0 to F.
Examples
# Display MLD SSM mappings for the IPv6 multicast group FF3E::101 on the public network.
<Sysname> display mld ssm-mapping ff3e::101
Group: FF3E::101
Source list:
1::1
1::2
10::1
100::10
Description
Whether the MLD querier sends MLD general queries at the
startup query interval on startup:
•
On—The MLD querier performs the above action.
•
Off—The MLD querier does not perform the above
action.
Remaining time for MLD other querier present timer.
If the timer is disabled, this field displays Off.
Total number of IPv6 multicast groups the interface joined
dynamically.
This field is not displayed if the interface does not join IPv6
multicast groups.
278