System Information Setup - Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual

3.5

System Information Setup

3.5.1 Quick Start up Software Version Information
Table 2-1. Quick Start up Software Version Information
Command
show hardware
show version
3.5.2 Quick Start up Physical Port Data
Table 2-2. Quick Start up Physical Port
Command
show Interface status { <slot/port> |
all}
3.5.3 Quick Start up User Account Management
Table 2-3. Quick Start up User Account Management
Command
show users
Details
Allows the user to see the HW & SW version
the device contains
System Description - switch's model name
Allows the user to see Serial Number, Part
Number, and Model name
See SW loader, bootrom and operation
version
See HW version
Details
Displays the Ports slot/port
Type - Indicates if the port is a special type of
port
Admin Mode - Selects the Port Control
Administration State
Physical Mode - Selects the desired port
speed and duplex mode
Physical Status - Indicates the port speed and
duplex mode
Link Status - Indicates whether the link is up
or down
Link Trap - Determines whether or not to send
a trap when link status changes
LACP Mode - Displays whether LACP is
enabled or disabled on this port
Flow Mode - Indicates the status of flow
control on this port
Cap. Status - Indicates the port capabilities
during auto-negotiation
Details
Displays all users that are allowed to access
the switch
User Access Mode - Shows whether the user
is able to change parameters on the switch
- 17 -