Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 299

no lldp med transmit-tlv [capabilities] [ex-pd] [ex-pse] [inventory] [location]
[network-policy]
capabilities -Transmit the LLDP capabilities TLV.
ex-pd - Transmit the LLDP extended PD TLV.
ex-pse - Transmit the LLDP extended PSE TLV.
inventory - Transmit the LLDP inventory TLV.
location - Transmit the LLDP location TLV.
network-policy - Transmit the LLDP network policy TLV.
Default Setting
None
Command Mode
Interface Config
7.12.2.12 lldp med all
The user can go to the CLI Global Configuration Mode to set LLDP-MED on all the ports, use the lldp
med all Global configuration command. Use the no lldp med all to disable LLDP-MED on all the ports.
Syntax
lldp med all
no lldp med all
Default Setting
Disabled
Command Mode
Global config
7.12.2.13 lldp med confignotification all
The user can go to the CLI Global Configuration Mode to set all the ports to send the topology change
notification, use the lldp med confignotification all Global configuration command. Use the no lldp
med confignotification all to remove all the ports to send the topology change notification.
Syntax
lldp med confignotification all
- 299 -