Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 390

Syntax
show mac access-lists
Default Setting
None
Command Mode
Privileged Exec
Display Message
Current number of all ACLs: The number of user-configured rules defined for this ACL.
Maximum number of all ACLs: The maximum number of ACL rules.
MAC ACL Name: The name of the MAC ACL rule.
Rules: The number of rule in this ACL.
Direction: Denotes the direction in which this MAC ACL is attached to the set of interfaces listed.
The value is Inbound.
Interfaces: Displays the list of interfaces (slot/port) to which this MAC ACL is attached in a given
direction.
VLANs: VLAN(s) to which the MAC ACL applies.
7.22.1.3 show ip access-lists
This command displays an Access Control List (ACL) and all of the rules that are defined for the ACL.
Syntax
show ip access-lists [<1-199> | <name>]
<1-199> - is the number used to identify the ACL.
<name> - is the name of the ACL.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Current number of ACLs: The number of user-configured rules defined for this ACL.
Maximum number of ACLs: The maximum number of ACL rules.
- 390 -