Fortinet FortiSwitch-80-PoE Quick Start Manual

FortiSwitch-80-PoE
Provides 62 Watts of dedicated PoE power
LED Description
LED
PWR
PoE Max
PoE LED port (1–4)
Port Link/Act/Speed LED
(1–8)
Package Contents
FS-80-PoE switch
Step 1. Unpacking
Open the shipping carton and carefully unpack its contents. The carton should contain the following items:
• One FS-80-PoE Switch
• One 90W AC-DC power adapter
• One country specific AC power cord
• One Quick Installation Guide (QSG)
• Four rubber feet to be used for shock cushioning
• Warranty Card
If any item is found missing or damaged, please contact your local reseller for replacement.
FortiSwitch-80-PoE User's Guide is available from the Fortinet website at
State Description
Green The unit is ready and has AC power.
Off The power switch is turned off or the power supply is not connected.
Red The power budget has exceeded.
Off Power budget has not exceeded. This is the desired condition.
Green Indicates the port is sending PoE to a powered device.
Red Indicates there is a problem with the power feed to the port.
Off Indicates the PoE is not sourced due to either an issue with the wiring, an incompatible
powered device, or the connected device does not need PoE.
Green The interface is connected at Gigabit rate.
Amber The interface is connected at 10/100 Mb rate.
Off The interface is not connected.
Flashing Indicates traffic activity.
QuickStart Guide
Power supply
Power adapter
http://docs.fortinet.com/.
QuickStart Guide
FortiGate-30B
FMC-XG2
1 (SFP +) 2 (SFP +)
ACTIVE
SERVICE
REGISTER
Copyright 2010 Fortinet Incorporated. All rights reserved.
Trademarks