Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 334

<filename> - name of the configuration or image file.
Default Setting
None
Command Mode
Privileged Exec
7.17.4 dir
This command is used to display a list of files in Flash memory.
Syntax
dir [boot-rom | config | opcode [<filename>] ]
<filename> - name of the configuration or image file.
boot-rom - bootrom.
config - configuration file.
opcode - run time operation code.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Column Heading
date
file name
file type
startup
size
7.17.5 whichboot
This command is used to display which files were booted when the system powered up.
Description
The date that the file was created.
The name of the file.
File types: Boot-Rom, Operation Code, and Config file.
Shows if this file is used when the system is started.
The length of the file in bytes.
- 334 -