Table of Contents
Advertisement
VTP Version: Displays the VTP version operating on the switch.
Configuration Revision: Displays the current configuration revision number on this switch.
Maximum VTP supported VLANs: Maximum number of VLANs supported locally.
VTP support VLAN number: Number of existing VLANs.
VTP Operating Mode: Displays the VTP operating mode, which can be server, client, or
transparent.
VTP Domain Name: Displays the name that identifies the administrative domain for the switch.
VTP Pruning Mode: Displays whether pruning is enabled or disabled.
VTP V2 Mode: Displays if VTP version 2 mode is enabled. By default, all VTP version 2 switches
operate in version 1 mode.
MD5 digest: Displays the checksum values for the VTP domain status.
Configuration last modified: Displays the time stamp of the last configuration modification and the
IP address of the switch that caused the configuration change to the database.
Local updater ID: Displays the Local updater ID for the VTP domain status.
7.14.1.4 show vtp trunkport
This command displays the VTP trunkport status.
Syntax
show vtp trunkport
Default Setting
None
Command Mode
Privileged Exec
Display Message
Port: Displays the interface number.
Trunkport: Displays the trukport status (enable or disable) on the interface number.
7.14.2 Configuration Commands
7.14.2.1 vtp
This command uses to configure global VTP administrative mode.
- 312 -
Advertisement
Table of Contents
