Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 290

<slot/port> - Displays a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Specifies all the ports on which LLDP-MED can be configured.
Link: Specifies the link status of the ports whether it is Up/Down.
ConfigMED: Specifies the LLDP-MED mode is enabled or disabled on this interface.
OperMED: Specifies the LLDP-MED TLVs are transmitted or not on this interface
ConfigNotify: Specifies the LLDP-MED topology notification mode of the interface.
TLVsTx: Specifies the LLDP-MED transmit TLV(s) that are included
7.12.1.10 show lldp med local-device detail
The user can go to the CLI Privilege Exec to display detailed information about the LLDP-MED data, use
the show lldp med local-device detail <unit/slot/port> Privilege command.
Syntax
show lldp med local-device detail <slot/port>
<slot/port> - Displays a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Network Policies Specifies if network policy TLV is present in the LLDP frames.
Media Policy Application Type: Specifies the application type. Types of application types are
unknown, voicesignaling, guestvoice, guestvoicesignalling, softphonevoice, videoconferencing,
streammingvideo, vidoesignalling. Each application type that is received has the VLAN id,
priority, DSCP, tagged bit status and unknown bit status. A port may receive one or many such
application types. If a network policy TLV has been transmitted only then would this information
be displayed.
Vlan ID: Specifies the VLAN id associated with a particular policy type.
Priority: Specifies the priority associated with a particular policy type.
DSCP: Specifies the DSCP associated with a particular policy type.
- 290 -