Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 100

Command Mode
Global Config
7.2.7.9 show ip igmp snooping querier
This command display IGMP snooping querier global information on the system.
Syntax
show ip igmp snooping querier
Command Mode
Privilege Exec
Display Information
IGMP Snooping Querier Mode: Administrative mode for IGMP Snooping. The default is disable.
Querier Address: Specify the Snooping Querier Address to be used as source address in periodic
IGMP queries. This address is used when no address is configured on the VLAN on which query is
being sent.
IGMP Version: Specify the IGMP protocol version used in periodic IGMP queries.
Querier Query Interval: Specify the time interval in seconds between periodic queries sent by the
snooping querier. The Query Interval must be a value in the range of 1 and 1800. The default value
is 60.
Querier Expiry Interval: Specify the time interval in seconds after which the last querier information
is removed. The Querier Expiry Interval must be a value in the range of 60 and 300. The default
value is 60.
7.2.7.10 show ip igmp snooping querier vlan
This command display IGMP snooping querier vlan information on the system.
Syntax
show ip igmp snooping querier vlan <1-3965>
<vlanid> - VLAN ID (Range: 1 - 3965).
Command Mode
Privilege Exec
- 100 -