Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 145

Default Setting
Disabled
Command Mode
Interface Config
7.2.17.6 queue ets scheduler-type
This command configures the scheduler type for an interface. The scheduler type is WRR or WERR.
When the ETS is enabled, the default scheduler type is WERR.
Syntax
queue ets scheduler-type [wrr|werr]
no queue ets scheduler-type
WRR - Set ETS scheduler type to WRR
WERR - Set ETS scheduler type to WERR
no - This command restores the scheduler type to WERR.
Default Setting
werr
Command Mode
Interface Config
7.2.17.7 queue ets weight
This command configures the weight ratio of the two priority groups (LAN and SAN) for an interface. The
sum of these two weight values should meet 100 in percentage. The default weights are 50 to 50.
Syntax
queue ets weight <1-99> <1-99>
no queue ets weight
<1 - 99> - weight values.
no - This command restores the weight values to 50 and 50.
- 145 -