Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 922

Queue Management Type - Queue depth management technique used for queues on this
interface. This is only used if device supports independent settings per-queue.
Queue Management Type can only be one of the following:

taildrop
11.7.4.6 Configuring Enhanced Transmission Selection (ETS) interface
Selection Criteria
Slot/Port - Choose a ETS configurable interfaces for setting.
Admin Mode - Enable/Disable Enhanced Transmission Selection function.

Enable - Enable ETS, start the ETS process and enable other configuration options.

Disable - Disable ETS and stop the ETS process. Other configuration will not be change if
you disable ETS.
The system's default ETS admin mode is disabled
Scheduler Type - Configures the scheduler type for an interface.

WERR - Set scheduler type to WERR.

WRR - Set the scheduler type to WRR.
When the ETS is enabled, the default scheduler type is WERR.
- 922 -