Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 162

7.3.3.3 line vty
This command is used to enter vty (Telnet) configuration mode.
Syntax
line vty
Default Setting
None
Command Mode
Global Config
7.3.3.4 exec-timeout
This command sets the remote connection session timeout value, in minutes. A session is active as long
as the session has been idle for the value set. A value of 0 indicates that a session remains active
indefinitely. The time is a decimal value from 0 to 160.
Changing the timeout value for active sessions does not become effective until the session
i
is reaccessed. Any keystroke will also activate the new timeout duration.
Syntax
exec-timeout <1-160>
no exec-timeout
<sec> - max connect time (Range: 1 -160).
no - This command sets the remote connection session timeout value, in minutes, to the default.
Default Setting
5
Command Mode
Line Vty
7.3.3.5 password-threshold
This command is used to set the password instruction threshold limited for the number of failed login
attempts.
- 162 -