Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 464

no ip ospf network
Default Setting
Broadcast
Command Mode
Interface Config
8.3.2.42 ip ospf priority
ip ospf priority command sets the OSPF priority for the specified router interface. The priority of the
interface is a priority integer from 0 to 255. A value of 0 indicates that the router is not eligible to become
the designated router on this network. no ip ospf priority command sets the default OSPF priority for
the specified router interface.
Syntax
ip ospf priority <0-255>
no ip ospf priority
Default Setting
1, which is the highest router priority
Command Mode
Interface Config
8.3.2.43 ip ospf retransmit-interval
ip ospf retransmit command sets the OSPF retransmit Interval for the specified interface. The
retransmit interval is specified in seconds. The value for <seconds> is the number of seconds between
link-state advertisement retransmissions for adjacencies belonging to this router interface. This value is
also used when retransmitting database description and link-state request packets. Valid values range
from 0 to 3600 (1 hour). no ip ospf retransmit command sets the default OSPF retransmit Interval for
the specified interface.
Syntax
ip ospf retransmit-interval <0-3600>
no ip ospf retransmit-interval
Default Setting
5
Command Mode
Interface Config
- 464 -