Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 194

show sflow receivers
Default Setting
None
Command Mode
Privilege Exec
Display Message
Receiver Index: The sFlow Receiver associated with the sampler/poller.
Owner String: The identity string for receiver, the entity making use of this sFlowRcvrTable entry.
Time Out: The time (in seconds) remaining before the receiver is released and stops sending
samples to sFlow receiver.
Max Datagram Size: The maximum number of bytes that can be sent in a single sFlow datagram.
Port: The destination Layer4 UDP port for sFlow datagrams.
IP Address: The sFlow receiver IP address.
7.3.13.4 show sflow samplers
The user can go to the CLI Privilege Exec to get the sFlow sampling instances created on the switch,
use the show sflow samplers Privilege command.
Syntax
show sflow samplers
Default Setting
None
Command Mode
Privilege Exec
Display Message
Sampler Data Source: The sFlowDataSource (slot/port) for this sFlow sampler. This agent will
support Physical ports only.
Receiver Index: The sFlowReceiver configured for this sFlow sampler.
Packet Sampling Rate: The statistical sampling rate for packet sampling from this source.
Max Header Size: The maximum number of bytes that should be copied from a sampled packet to
form a flow sample.
- 194 -