Table of Contents
Advertisement
Command Mode
Privileged Exec
User Exec
Display Message
VRID: Represents the router ID of the virtual router.
Primary IP Address: This field represents the configured IP Address for the Virtual router.
VMAC address: Represents the VMAC address of the specified router.
Authentication type: Represents the authentication type for the specific virtual router.
Priority: Represents the priority value for the specific virtual router.
Advertisement interval: Represents the advertisement interval for the specific virtual router.
Pre-Empt Mode: Is the preemption mode configured on the specified virtual router.
Administrative Mode: Represents the status (Enable or Disable) of the specific router.
State: Represents the state (Master/backup) of the specific virtual router
8.8.1.4
show ip vrrp interface stats
This command displays the statistical information about each virtual router configured on the switch.
Syntax
show ip vrrp interface stats <slot/port> [ <vrid>]
<slot/port> - Valid slot and port number separated by forward slashes.
<vrid> - Virtual router ID.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
VRID: Represents the router ID of the virtual router.
Uptime: Is the time that the virtual router has been up, in days, hours, minutes and seconds.
Protocol: Represents the protocol configured on the interface.
State Transitioned to Master: Represents the total number of times virtual router state has
changed to MASTER.
Advertisement Received: Represents the total number of VRRP advertisements received by this
virtual router.
- 486 -
Advertisement
Table of Contents
