Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 441

OSPF Admin Mode: States whether OSPF is enabled or disabled on a router interface.
OSPF Area ID: The OSPF Area Id for the specified interface.
Router Priority: A number representing the OSPF Priority for the specified interface.
Hello Interval: A number representing the OSPF Hello Interval for the specified interface.
Dead Interval: A number representing the OSPF Dead Interval for the specified interface.
Retransmit Interval: A number representing the OSPF Retransmit Interval for the specified
interface.
Retransmit Delay Interval: A number representing the OSPF Transit Delay for the specified
interface.
LSA Ack Interval: A number representing the OSPF LSA Acknowledgment Interval for the specified
interface.
8.3.1.9 show ip ospf interface stats
This command displays the statistics for a specific interface. The information below will only be displayed
if OSPF is enabled.
Syntax
show ip ospf interface stats <slot/port>
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
OSPF Area ID: The area id of this OSPF interface.
Area Border Router Count: The total number of area border routers reachable within this area.
This is initially zero, and is calculated in each SPF pass.
AS Border Router Count: The total number of Autonomous System border routers reachable within
this area.
Area LSA Count: The total number of link-state advertisements in this area's link-state database,
excluding AS External LSAs.
IP Address: The IP address associated with this OSPF interface.
OSPF Interface Events: The number of times the specified OSPF interface has changed its state,
or an error has occurred.
Virtual Events: The number of state changes or errors that occurred on this virtual link.
Neighbor Events: The number of times this neighbor relationship has changed state, or an error
has occurred.
- 441 -