Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 612

10.7.2.8 ipv6 pimsm bsr-border
Use this command to prevent bootstrap router (BSR) messages from being sent or received through an
interface.
Syntax
ipv6 pimsm bsr-border
no ipv6 pimsm bsr-border
no - Use this command to disable the interface from being the BSR border.
Default Setting
Disbaled
Command Mode
Interface Config
10.7.2.9 ipv6 pimsm dr-priority
Use this command to set the priority value for which a router is elected as the designated router (DR).
Syntax
ipv6 pimsm dr-priority <0-2147483647>
no ipv6 pimsm dr-priority
no - Use this command to disable the interface from being the BSR border.
Default Setting
Disabled
Command Mode
Interface Config
10.7.2.10 ipv6 pimsm join-prune-interval
This command is used to configure the interface join/prune interval for the PIM-SM router. The join/prune
interval is specified in seconds. This parameter can be configured to a value from 0 to 18000.
Syntax
ipv6 pimsm join-prune-interval <10-3600>
no ipv6 pimsm join-prune-interval
- 612 -