Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 522

9.5.2 Configuration Commands
9.5.2.1 ip pimdm
This command enables the administrative mode of PIM-DM in the router.
Syntax
ip pimdm
no ip pimdm
no - This command disables the administrative mode of PIM-DM in the router. IGMP must be
enabled before PIM-DM can be enabled.
Default Setting
Disabled
Command Mode
Global Config
9.5.2.2 ip pimdm
This command sets administrative mode of PIM-DM on an interface to enabled.
Syntax
ip pimdm
no ip pimdm
no - This command sets administrative mode of PIM-DM on an interface to disabled.
Default Setting
Disabled
Command Mode
Interface Config
- 522 -