Table of Contents
Advertisement
Syntax
ping <ipaddress|hostname> count <0-20000000> [size <32-512>]
ping <ipaddress|hostname> size <32-512> [count <0-20000000>]
< ipaddress|hostname> - a host name or an IP address.
<0-20000000> - number of pings (Range: 0 - 20000000). Note that 0 means infinite.
<size> - packet size (Range: 32 - 512).
Default Setting
Count = 5
Size = 32
Command Mode
Privileged Exec
7.17.7.2 ping ipv6 <ipv6-address|hostname>
This command use to determine whether another computer is on the network. To use the command,
configure the switch for network (in-band) connection. The source and target devices must have the ping
utility enabled and running on top of TCP/IP. The switch can be pinged from any IP workstation with
which the switch is connected through the default VLAN (VLAN 1), as long as there is a physical path
between the switch and the workstation. The terminal interface sends three pings to the target station.
Use the <ipv6-address> parameter to ping an interface by using the global IPv6 address of the interface,
or use the <hostname> parameter to ping a interface by using the hostname of the target. Use the
optional size keyword to specify the size of the ping packet.
Syntax
ping ipv6 <ipv6-address|hostname> [size <datagram-size>]
<ipv6-address|hostname> - A global IPv6 address or valid hostname.
<datagram-size> - Datagram size. Range 48 - 2048.
Default Setting
None
Command Mode
Privileged Exec
- 336 -
Advertisement
Table of Contents
