Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 218

no - This command sets the Administrative Switch Port State for all ports to disabled.
Default Setting
Disabled
Command Mode
Global Config
7.4.2.12 spanning-tree auto-edge
This command sets the auto-edge for this port to enabled.
Syntax
spanning-tree auto-edge
no spanning-tree auto-edge
no - This command sets the auto-edge for this port to disabled.
Default Setting
Disabled
Command Mode
Interface Config
7.4.2.13 spanning-tree edgeport
This command sets the edguport function to Enabled or Disabled on this switch.
Syntax
spanning-tree edgeport
no spanning-tree edgeport
no - This command sets the Edgeport function to the default value, that is Enabled.
Default Setting
Enabled
Command Mode
Global Config
- 218 -