Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 920

Selection Criteria
Slot/Port - Specifies all CoS configurable interfaces. The option "Global" represents the most recent
global configuration settings. These may be overridden on a per-interface basis.
Configurable Data
Interface Shaping Rate - Specifies the maximum bandwidth allowed, typically used to shape the
outbound transmission rate. This value is controlled independently of any per-queue maximum
bandwidth configuration. It is effectively a second-level shaping mechanism. Default value is 0. Valid
Range is (0 to 100) in increments of 5 . The value 0 means maximum is unlimited.
Command Buttons
Restore Defaults - Restores default settings.
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
11.7.4.4 Configuring CoS interface queue
Selection Criteria
Slot/Port - Specifies all CoS configurable interfaces. The option "Global" represents the most recent
global configuration settings. These may be overridden on a per-interface basis.
Queue ID - Specifies all the available queues per interface(platform based).
Scheduler Type - Specifies the type of scheduling used for this queue.
Scheduler Type can only be one of the following:

strict

weighted
Default value is weighted.
Queue Management Type - Queue depth management technique used for queues on this
interface. This is only used if device supports independent settings per-queue.
Queue Management Type can only be:
- 920 -