Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 137

Command Mode
Global Config
Display Message
Admin Mode: the link state admin mode.
Group ID: The group ID for each displayed row.
Mode: This group was set which mode.
UpStream: Display such port was included to UpStream set.
DownStream: Display such port was included to DownStream set.
7.2.14.2 link state
Enable/Disable the link state admin mode. Use 'link state' to enable the admin mode of redundant
function, and use no command to disable the function.
Create/Destroy the link state group. Use 'link state group' to create a group. Use no command to destroy
the group.
Enable/Disable a link state group. Use link state group enable <group id> to enable individual group, and
use no command to disable a group.
Syntax
link state [group | [enable <1-6>]]
no link state [group <1-6> | [enable <1-6>]]
no - This command disables link state function.
Command Mode
Global Config
7.2.14.3 link state group
Set upstream port or downstream port for a link state group. Use 'link state group <group id> upstream'
to set the port to be monitored.
Syntax
link state group <1-6> {downstream | upstream}
no link state group <1-6> {downstream | upstream}
no - This command disables link state group function.
- 137 -