Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 643


Error (3): error conditions

Warning (4): warning conditions

Notice(5): normal but significant conditions

Informational(6): informational messages

Debug(7): debug-level messages
Command Buttons
Submit - Update the switch with the values you entered.
11.2.5.8 Configuring syslog configuration Page
Selection Criteria
Admin Status -For Enabling and Disabling logging to configured syslog hosts. Setting this to disable
stops logging to all syslog hosts. Disable means no messages will be sent to any collector/relay.
Enable means messages will be sent to configured collector/relays using the values configured for
each collector/relay. Enable/Disable the operation of the syslog function by selecting the
corresponding line on the pulldown entry field.
Configurable Data
Local UDP Port This is the port on the local host from which syslog messages are sent. The default
port is 514. Specify the local port in the text field.
Non-Configurable Data
Messages Received - The number of messages received by the log process. This includes
messages that are dropped or ignored.
Messages Dropped - The number of messages that could not be processed due to error or lack of
resources.
Messages Relayed - The number of messages forwarded by the syslog function to a syslog host.
Messages forwarded to multiple hosts are counted once for each host.
Command Buttons
Submit - Update the switch with the values you entered.
- 643 -