Table of Contents
Advertisement
10.7.1.2 show ipv6 pimsm bsr
This command displays the bootstrap router (BSR) information. The output includes elected BSR
information and information about the locally configured candidate rendezvous point (RP)
advertisement.
Syntax
show ipv6 pimsm bsr
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
BSR Address: IP address of the BSR.
Uptime: Length of time that this router has been up (in hours, minutes, and seconds).
BSR Priority: Priority as configured in the ip pimsm bsr-candidate command.
Hash Mask Length: Length of a mask (maximum 32 bits) that is to be ANDed with the group
address before the hash function is called. This value is configured in the ip pimsm bsr-candidate
command.
Next Bootstrap Message In: Time (in hours, minutes, and seconds) in which the next bootstrap
message is due from this BSR.
Next Candidate RP advertisement in: Time (in hours, minutes, and seconds) in which the next
candidate RP advertisement will be sent.
10.7.1.3 show ipv6 pimsm interface
This command displays interface configuration parameters for PIM-SM on the specified interface. If no
interface is specified,all interfaces are displayed.
Syntax
show ipv6 pimsm interface [<unit/slot/port>]
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Slot Port: Valid unit, slot, and port number separated by forward slashes.
- 606 -
Advertisement
Table of Contents
