Table of Contents
Advertisement
Group Mode - Choose the group administrative mode for the switch by selecting enable or disable
from the pull-down menu. The factory default is disabled. You could enable this group as active port
and backup port are configured.
Active port - Configure the active port for a group. 6 port pair for six 1Gbps are configurable for
active port.
Backup port - Choose the backup port for a group. 6 port pair for six 1Gbps are configurable for
backup port.
MAC Move Update - Choose the MAC Move Update mode for the switch by selecting enable or
disable from the pull-down menu.
Configurable Data
Fail Back Timer - Configure the time delay for activating the active port.
Command Buttons
Submit - Update the switch with the values on this screen. If you want the switch to retain the new
values across a power cycle, you must perform a save.
Delete - Delete this group.
11.3.26.2 Configuring Port-Backup Status
This page displays the status of all currently configured port-backup.
Non-Configurable Data
Admin Mode - The administrative mode of the port-backup function.
Group ID - The group identify of the port-backup. The range of the group ID is 1~6.
Mode - The administrative mode of this group.
Active port - The configured active port for this group.
Backup port - The configured backup port for this group.
Current Active port - Current active port for this group.
Failback Time - The Failback Time value for the group.
MAC Move Update - The MAC Move Update mode for the group.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the switch.
- 782 -
Advertisement
Table of Contents
