Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 160

<0-65535> - silent time (Range: 0 - 65535) in seconds.
no - This command sets the maximum value to the default.
Default Setting
0
Command Mode
Line Config
7.3.2.7 terminal length
This command uses to configure the columns per page for the management console.
Syntax
terminal-length <10-100>
<10-100> - Columns per page (Range: 10 - 100).
no - This command sets the value to the default.
Default Setting
24
Command Mode
Line Config
7.3.3 Telnet Session Commands
7.3.3.1 telnet
This command establishes a new outbound telnet connection to a remote host.
Syntax
telnet <host> [port] [debug] [line] [echo]
<host> - A hostname or a valid IP address.
[port] - A valid decimal integer in the range of 0 to 65535, where the default value is 23.
[debug] - Display current enabled telnet options.
- 160 -