Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 168

7.3.4.3 sshc maxsessions
This command specifies the maximum number of simultaneous outbound ssh sessions. A value of 0
indicates that no outbound ssh session can be established.
Syntax
sshc maxsessions <0-5>
no maxsessions
<0-5> - max sessions (Range: 0 - 5).
no - This command sets the maximum value to be 5.
Default Setting
5
Command Mode
Global Config
7.3.4.4 sshc exec-timeout
This command sets the outbound ssh session timeout value in minute.
Changing the timeout value for active sessions does not become effective until the session
i
is reaccessed. Any keystroke will also activate the new timeout duration.
Syntax
sshc exec-timeout <1-160>
no sshc exec-timeout
<1-160> - max connect time (Range: 1 -160).
no - This command sets the remote connection session timeout value, in minutes, to the default.
Default Setting
5
Command Mode
Global Config
7.3.4.5 show sshc
This command displays the current outbound sshc settings.
- 168 -