Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 96

7.2.6.18 show mac-address-table igmpsnooping
The user can go to the CLI Privilege Exec to display the IGMP Snooping entries in the Multicast
Forwarding Database (MFDB) table, use the show mac-address-table igmpsnooping Privilege
command.
Syntax
show mac-address-table igmpsnooping
Default Setting
None
Command Mode
Privilege Exec
Display Message
MAC Address: A multicast MAC address for which the switch has forwarding or filtering information.
The format is twodigit hexadecimal numbers that are separated by colons, for example
01:00:5e:67:89:AB.
Type: The type of entry, which is either static (added by the user) or dynamic (added to the table as
a result of a learning process or protocol.)
Description: The text description of this multicast table entry.
Interfaces: The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
7.2.7 IGMP Snooping Querier
7.2.7.1 ip igmp snooping querier
The user can go to the CLI Global Configuration Mode to set IGMP snooping querier admin mode, use
the ip igmp snooping querier global configuration command. Use the no ip igmp snooping querier to
disable.
Syntax
ip igmp snooping querier
no ip igmp snooping querier
Default Setting
Disabled
Command Mode
Global Config
- 96 -