Table of Contents
Advertisement
IP Address: The IP address of the specified interface.
Subnet Mask: The Subnet Mask for the IP address of the PIM interface.
Hello Interval (secs): The frequency at which PIM hello messages are transmitted on this interface.
By default, the value is 30 seconds.
Join Prune Interval (secs): The join/prune interval for the PIM-SM router. The interval is in
seconds.
Neighbor Count: The neighbor count for the PIM-SM interface.
Designated Router: The IP address of the Designated Router for this interface.
DR Priority: The priority of the Designated Router.
BSR Border: The bootstrap router border interface. Possible values are enabled or disabled.
10.7.1.4 show ipv6 pimsm neighbor
This command displays the neighbor information for PIM-SM on the specified interface.
Syntax
show ipv6 pimsm neighbor {<unit/slot/port> | all}
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Interface: Valid unit, slot, and port number separated by forward slashes.
IP Address: The IP address of the neighbor on an interface.
Up Time: The time since this neighbor has become active on this interface.
Expiry Time: The expiry time of the neighbor on this interface.
10.7.1.5 show ipv6 pimsm rphash
This command displays which rendezvous point (RP) is being used for a specified group.
Syntax
show ipv6 pimsm rphash <group-address>
<group-address> - the IP multicast group address.
- 607 -
Advertisement
Table of Contents
