Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 251

Default Setting
None
Command Mode
Global Config
7.8.2.2 username defaultlogin
This command assigns the authentication login list to use for non-configured users when attempting to
log in to the system. This setting is overridden by the authentication login list assigned to a specific user
if the user is configured locally. If this value is not configured, users will be authenticated using local
authentication only.
Syntax
username defaultlogin <listname>
<listname> - an authentication login list.
Default Setting
None
Command Mode
Global Config
7.8.2.3 username login
This command assigns the specified authentication login list to the specified user for system login. The
<username> must be a configured <username> and the <listname> must be a configured login list.
If the user is assigned a login list that requires remote authentication, all access to the interface from all
CLI, web, and telnet sessions will be blocked until the authentication is complete.
The login list associated with the 'admin' user cannot be changed to prevent
i
accidental lockout from the switch.
Syntax
username login <user> <listname>
<user> - is the login user name.
<listname> - an authentication login list.
- 251 -