Table of Contents
Advertisement
Syntax
congestion-notify msg ethertype <0-65535>
no congestion-notify msg ethertype
<0-65535> - This command sets the Ether Type value of CNM.
no - This command disables Ether Type for Congestion Notification Message (CNM).
Default Setting
0x22e7
Command Mode
Global Config
7.2.18.7 congestion-notify CPID
The user can go to the CLI Global Configuration Mode to configure the device identifier of CPID. Use the
'congestion-notify CPID devid <value>' global configuration command. Use the 'no congestion-notify
CPID devid' to configure device identifier to default value.
Syntax
congestion-notify CPID devid < 0-16777215 >
no congestion-notify CPID devid
<0-16777215> - This command sets the Device ID of CPID
no - This command configure device identifier to default value.
Default Setting
0
Command Mode
Global Config
The user can go to the CLI Global Configuration Mode to configure the LSB field of CPID of CNM
payload. Use the 'congestion-notify CPID LSB Q_No' global configuration command to set the CPID
mode to use queue number of sampled packet. Use the 'congestion-notify LSB CPIndex' to configure
device identifier to use congestion point index.
Syntax
congestion-notify CPID LSB { CPIndex | Q_No}
- 150 -
Advertisement
Table of Contents
