Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 197

7.3.13.10 set sflow interval
The user can go to the CLI Interface Configuration Mode to set polling interval, use the sflow poller
interval <0-86400> interface configuration command. Use the no sflow poller interval return to default
value zero.
Syntax
sflow poller interval <0-86400>
no sflow poller interval
Default Setting
0
Command Mode
Interface Config
7.3.13.11 set sflow sampler index
The user can go to the CLI Interface Configuration Mode to configure a new sFlow sampler instance, use
the sflow sampler <index> interface configuration command. Use the no sflow sampler return to
default setting.
Syntax
sflow sampler <index>
no sflow sampler
Default Setting
None
Command Mode
Interface Config
7.3.13.12 set sflow poller index
The user can go to the CLI Interface Configuration Mode to configure a new sFlow poller instance, use
the sflow poller <index> interface configuration command. Use the no sflow poller return to default
setting.
Syntax
sflow poller <index>
no sflow poller
- 197 -