Table of Contents
Advertisement
Retransmit Interval: A number representing the OSPF Retransmit Interval for the specified
interface.
Hello Interval: A number representing the OSPF Hello Interval for the specified interface.
Dead Interval: A number representing the OSPF Dead Interval for the specified interface.
LSA Ack Interval: A number representing the OSPF LSA Acknowledgment Interval for the specified
interface.
Transit Delay Interval: A number representing the OSPF Transit Delay for the specified interface.
Authentication Type: The OSPF Authentication Type for the specified interface are: none, simple,
and encrypt.
Metric Cost: The cost of the OSPF interface.
Passive Status: Shows whether the interface is passive or not.
OSPF MTU-ignore: Indicates whether to ignore MTU mismatches in database descriptor packets
sent from neighboring routers.
The information below will only be displayed if OSPF is enabled.
OSPF Interface Type: Broadcast LANs, such as Ethernet and IEEE 802.5, take the value
broadcast. The OSPF Interface Type will be 'broadcast'.
State: The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router,
and backup designated router.
Designated Router: The router ID representing the designated router.
Backup Designated Router: The router ID representing the backup designated router.
Number of Link Events: The number of link events.
Local Link LSAs: The number of Link Local Opaque LSAs in the link-state database.
Local Link LSA Checksum: The sum of LS Checksums of Link Local Opaque LSAs in the link-state
database.
8.3.1.8
show ip ospf interface brief
This command displays brief information for the IFO object or virtual interface tables.
Syntax
show ip ospf interface brief
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Interface: Valid slot and port number separated by a forward slash.
- 440 -
Advertisement
Table of Contents
