Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 154

Command Mode
Privileged Exec
Display Message
Manegement IP Filter Address Table: The admin mode status for IP filter.
Index: The index of stations.
IP Address: The IP address of stations that are allowed to make configuration changes to the
Switch.
7.3.1.3 mtu
This command sets the maximum transmission unit (MTU) size (in bytes) for physical and port-channel
(LAG) interfaces. For the standard implementation, the range of <1518-9216> is a valid integer between
1518-9216.
Syntax
mtu <1518-9216>
no mtu
<1518-9216> - Max frame size (Range: 1518 - 9216).
no - This command sets the default maximum transmission unit (MTU) size (in bytes) for the
interface.
Default Setting
1518
Command Mode
Interface Config
7.3.1.4 interface vlan
This command is used to enter Interface-vlan configuration mode.
Syntax
interface vlan <vlanid>
<vlanid> - VLAN ID (Range: 1 - 3965).
Default Setting
None
- 154 -