Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 141

7.2.16.4 show fip-snooping fcf
This command displays to what interfaces the FCFs are connected for the entire system.
Syntax
show fip-snooping fcf
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Name of the interface to which the FCoE Forwarder (FCF) is connected.
VLAN ID: ID number of the VLAN to which the FCF belongs.
FC MAP: May FC-Map value used by the FCF.
FCF MAC: MAC address of the FCF.
Switch Name: Name ID.
Fabric Name: Name of the FCF.
7.2.16.5 show fip-snooping vlan
This command displays FIP snooping whether enable or disable on specific VLAN.
Syntax
show fip-snooping vlan {< 1-3965> | all}
<1 - 3965> - VLAN ID.
all - This command represents all interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Vlan ID: fip-snooping function status on the specific VLAN.
- 141 -