Fortinet FortiSwitch-548B v. 5.2.0.2 Administration Manual page 626

11.2.3.8 Configuring Outbound Telnet Client Configuration Page
Selection Criteria
Admin Mode - Specifies if the Outbound Telnet service is Enabled or Disabled. Default value is
Enabled.
Maximum Sessions - Specifies the maximum number of Outbound Telnet Sessions allowed.
Default value is 5. Valid Range is (0 to 5).
Configurable Data
Session Timeout - Specifies the Outbound Telnet login inactivity timeout. Default value is 5. Valid
Range is (1 to 160).
Command Buttons
Submit - Sends the updated configuration to the switch. Configuration changes take effect
immediately.
11.2.3.9 Configuring Outbound SSH Client Configuration Page
Selection Criteria
Admin Mode - Specifies if the Outbound Telnet service is Enabled or Disabled. Default value is
Enabled.
Maximum Sessions - Specifies the maximum number of Outbound Telnet Sessions allowed.
Default value is 5. Valid Range is (0 to 5).
Configurable Data
- 626 -